1
9.9kviews
List & describe SNMP command with syntax?
written 6.1 years ago by | • modified 6.0 years ago |
Subject: Telecom Network Management
Topic: Internet Management(SNMP)
Difficulty: medium
ADD COMMENT
EDIT
2 Answers
written 6.1 years ago by | • modified 6.0 years ago |
Subject: Telecom Network Management
Topic: Internet Management(SNMP)
Difficulty: medium
written 6.0 years ago by |
Command | Syntax | Explanation |
---|---|---|
DISABLE SNMP | disable snmp | Enter this command to disable SNMP and all SNMP related commands. Be default, SNMP is disabled. |
ENABLE SNMP | enable snmp | Enter this command to enable SNMP and all SNMP related commands. By default, SNMP is disabled. |
SET SNMP TRAPCOMMUNITY | set snmp trapcommunity {<"Trap community string">} | Enter this command to set the trap community string. By default, the value is “COMPAQ”. |
SET SNMP TRAPDEST | set snmp trapdest {,1 / 2 / 3 } {[none] / []} | Enter this command to set up to three SNMP trap destinations. Trap destinations cannot be FQDN addresses, you must use IPv4 addresses only. Specify none to remove a trap destination.. |
SHOW SNMP | show snmp | Enter this command to show all SNMP configuration settings. |
TEST SNMP | test snmp | Enter this command to send a test trap to all of the configured trap destinations. The command sends a standard test trap (11003) for the test. See SNMP trap codes and descriptions for a list of the SNMP trap codes and descriptions. |