0
732views
Materials for substrates

Subject: MEMS Technology

Topic: MEMS Fab Processes II

Difficulty: Medium

1 Answer
0
1views

Substrates in LIGA process must be electrical conductive to facilitate subsequent electroplating over photoresists mould.

Metals such as: steel copper plates, titanium and nickel, orSilicon with thin titanium or silver / chrome top layer, glass with thin metal layers.

Photoresists materials

Basic requirements:

• Must be sensitive to x-ray radiation.

• Must have high resolution and resistance to dry and wet etching.

• Must have thermal stability up to 1400C.

• The unexposed part must be absolutely insoluble during development.

• Good adhesion to substrate during electroplating.

• PMMA appears most popular for LIGA process, but other polymers are available:

enter image description here

Electroplating

The inner surfaces of the photoresists mold produced by X-ray lithography need to be plated with thin metal layers for securing permanent microstructure geometry.

Metals available for the plating are: Ni, Cu, Au, NiFe and N/W.

In case of plating with Ni, the process is:

Nickel ions (Ni2+) are produced from electrolysis of NiCl2 solution.They are attracted to the electrons at the cathode:

Ni2 + 2e  Ni

There could be H+ ions presence at the same cathode in the process.These H+ ions may form H2 bubbles on the cathode, and thus Ni plate.

Proper control of the pH in the solution is important to miligate this effect.

Please log in to add an answer.