0
6.6kviews
Explain the necessity and significance of modulation in communication.

Mumbai University > Computer Engineering > Sem 3 > Electronic Circuits and Communication Fundamentals

Marks: 5 Marks

Year: May 2016

1 Answer
0
124views

Necessity of modulation in communication system

I. To separate signal from different transmitters :-

Audio frequencies are within the range of 20 Hz to 20 kHz. Without modulation all signals at same frequencies from different transmitters would be mixed up. There by giving impossible situation to tune to any one of them. In order to separate the various signals, radio stations must broadcast at different frequencies.

Each radio station must be given its own frequency band. This is achieved by frequency translation as a result of modulation process.

II. Size of the antenna : –

For efficient transmission the transmitting antennas should have length at least equal to a quarter of the wavelength of the signal to be transmitted. For an electromagnetic wave of frequency 15 kHz, the wavelength λ is 20 km and one-quarter of this will be equal to 5 km. obviously, a vertical antenna of this size is impartible. On the other hand, for a frequency of 1 MHz, this height is reduced to 75m.

Also, the power radiated by an antenna of length l is proportional to (l/λ)2. This shows that for the same antenna length, power radiated is large for shorter wavelength. Thus, our signal which is of low frequency must be translated to the high frequency spectrum of the electromagnetic wave. This is achieved by the process of modulation.

Significance of modulation in communication

  1. In a carrier communication system, the baseband signal of a low-frequency spectrum is translated to a high frequency spectrum. This is achieved through modulation. The aim of this topic is to explore the reasons for using modulation. Modulation is defined as a process by virtue of which, some characteristic of a high frequency sinusoidal wave is varied in accordance with the instantaneous amplitude of the baseband signal.
  2. Two signals are involved in the modulation process. The baseband signal and the carrier signal. The baseband signal is to be transmitted to the receiver. The frequency of this signal is generally low. In the modulation process, this baseband signal is called the modulating signal. The waveform of this signal is unpredictable. For example, the waveform of a speech signal is random in nature and cannot be predicted. In this case, the speech signal is the modulating signal.
  3. The other signal involved with the modulation is a high frequency sinusoidal wave. This signal is called the carrier signal or carrier. The frequency of the carrier signal is always much higher than that of the baseband signal. After modulation, the baseband signal of low frequency is transferred to the high frequency carrier, which carries the information in the form of some variations. After the completion of the modulation process, some characteristic of the carrier is varied such that the resultant variations carry the information.
Please log in to add an answer.