0
2.1kviews
Surveying - 2 : Question Paper May 2016 - Civil Engineering (Semester 4) | Mumbai University (MU)
1 Answer
0
2views

Surveying - 2 - May 2016

Civil Engineering (Semester 4)

TOTAL MARKS: 80
TOTAL TIME: 3 HOURS
(1) Question 1 is compulsory.
(2) Attempt any three from the remaining questions.
(3) Assume data if required.
(4) Figures to the right indicate full marks.


Write short notes on (Any four)

1(a) Block contouring project in survey camp(5 marks) 1(b) Methods of tacheometry(5 marks) 1(c) Route surveying(5 marks) 1(d) Remote sensing(5 marks) 1(e) Designations of curves(5 marks) 1(f) Electronic Digital Theodolite(5 marks) 2(a) Describe the radial contouring project in detail?(10 marks) 2(b) In tacheometry, the following observations were observed with a tacheometer, fitted with anallatic lens and multiplying constant as 100. If the RL of BM is 555.700m. Calculate the Rls of A, B and C?

Inst.

sth

ht

(m)

staff

stn

vertical

single

staff readings

(m)

remark
A 1.40 BM -1°35' 3.540, 2.330, 1.120

LOS Inclined

staff vertical

A 1.40 B +2°54' 3.550, 2.380, 1.210
B 1.38 C +3°12' 3.985, 2.425, 0.865
(10 marks) 3(a) The stadia readings with a horizontal sight on a vertical held 50m away from a tacheometer are 1.284 and 1.780m. The total length of object glass is 250mm. The distance object glass and trunnion axis is 150mm, calculate stadia interval?(10 marks) 3(b) Explain the steps involved in determining 'L' section and 'C' section of a road? State the practical utilities of these for a civil engineer?(10 marks)


Explain the followings with neat sketches

4(a)(i) Compound curve(3 marks) 4(a)(ii) Composite curve(3 marks) 4(a)(iii) Reverse curve(3 marks) 4(a)(iv) Vertical curve(3 marks) 4(b) What are the essential requirements of a transition curve? Derive an expression for an ideal transition curve?(8 marks) 5(a) Two tangents intersect at chainage (79_10) and the deflection angle is 50° 30'. Compute the necessary data for setting out of simple circular right hand curve of 300 m radius by Rankine's method. Take P.I. = 30m. Prepare setting out table and show necessary checks.(12 marks) 5(b) Discuss the methods of setting out simple circular curve with sketches.(8 marks)


Explain the following

6(a) GPS(5 marks) 6(b) EDM(5 marks) 6(c) Use of computers in surveying(5 marks) 6(d) Total station(5 marks) 6(e) Project survey for a dam(5 marks) 6(f) Setting out of culvert(5 marks)

Please log in to add an answer.