0
23kviews
Write in detail about Skew rays.

Mumbai University > Electronics and Telecomm > Sem 7 > Optical Communication and Network

Marks: 5M

1 Answer
2
1.2kviews

1.Skew rays are rays that travel through an optical fiber without passing through its axis.

2.A possible path of propagation of skew rays is shown in figure. Figure 24, view (a), provides an angled view and view (b) provides a front view.

3.Skew rays are those rays which follow helical path but they are not confined to a single plane. Skew rays are not confined to a particular plane so they cannot be tracked easily. Analyzing the meridional rays is sufficient for the purpose of result, rather than skew rays, because skew rays lead to greater power loss.

4.Skew rays propagate without passing through the center axis of the fiber. The acceptance angle for skew rays is larger than the acceptance angle of meridional rays.

5.Skew rays are often used in the calculation of light acceptance in an optical fiber. The addition of skew rays increases the amount of light capacity of a fiber. In large NA fibers, the increase may be significant.

enter image description here

Figure 24: The helical path taken by a skew ray in an optical fiber: (a) skew ray path down the fiber; (b) cross-sectional view of the fiber

6.The addition of skew rays also increases the amount of loss in a fiber. Skew rays tend to propagate near the edge of the fiber core. A large portion of the number of skew rays that are trapped in the fiber core are considered to be leaky rays.

7.Leaky rays are predicted to be totally reflected at the core-cladding boundary. However, these rays are partially refracted because of the curved nature of the fiber boundary. Mode theory is also used to describe this type of leaky ray loss.

Please log in to add an answer.