0
3.5kviews
With neat sketch,describe operations of tunnel diode,State its applications. OR Sketch the construction of Tunnel diode and write its operation.
1 Answer
0
111views

enter image description here

Operation:

  • Tunnel diode is a thin junction diode which under low forward bias conditions exhibits negative resistance useful for oscillation or amplification.
  • The junction capacitance of the tunnel diode is highly dependent on the bias voltage and temperature.
  • A very small tin dot about 50μm in diameter is soldered or alloyed to a heavily doped pellet of n- type Ge, GaSb or GaAs.
  • The pellet is then soldered to a kovar pedestal, used for heat dissipation, which forms the anode contact.
  • The cathode contact is also kovar being connected to the tin dot via a mesh screen used to reduce inductance.
  • The diode has a ceramic body and hermetically sealing lid on top.
  • In tunnel diode semiconductor material are very heavily doped, as much as 1000 times more than in ordinary diodes.
  • This heavy doping result in a junction which has a depletion layer that is so thin (0.01μm) as to prevent tunneling to occur.
  • In addition, the thinness of the junction allows microwave operation of the diode because it considerably shortens the time taken by the carriers to cross the junction.
  • A current-voltage characteristics for a typical Germanium tunnel diode is shown in figure.
  • Forward current rises sharply as voltage is applied. At point A, peak voltage occurs.
  • As forward bias is increased past this point, the forward current drops and continues to drop until point B is reached, this is the valley voltage.
  • At point B current starts to increase once again and does so very rapidly as bias is increases further.
  • Diode exhibits dynamic negative resistance between A and B therefore, useful for oscillator applications.

enter image description here

Application:

1)Tunnel diode maybe used as a mixers.

2)Being high speed device ,tunnel diodes also used for high speed switching and logic operations as flip flop gates

3)They are used s oscillators upto 100 Ghz.

Please log in to add an answer.