Question: Design a rectangular surface water tank of size 6 m X 3 m. The tank is open at the top. Use approximate method of design. Adopt concrete $M_{20}$, $Fe_{415}$.
0

Sketch the reinforcement’s details for following -

a) Sectional plan at 1 m height from bottom.

b) Sectional elevation through walls showing reinforcements details at support and mid span.

ddrcs mumbai university • 155 views
ADD COMMENTlink
modified 7 months ago  • written 7 months ago by gravatar for tanya.tanyabarnwal tanya.tanyabarnwal0
0

Data:

L=6m, B=4m

L/b=6/4=1.5<2

Both the walls shall be subjected to horizontal and vertical B.M.

H=3 m , $M_{20}$, $Fe_{415}$

Thickness of wall:-

l$_{1}$ = 150 mm

l$_{2}$ = 30 H + 50= 30 ×3 + 50 = 140 mm.

l$_{3}$ = 60 × L = 60 × 6 = 360 mm

Assume thickness as 400 mm.

Horizontal steel:

enter image description here

= 3/4 or 1 m h=1m

enter image description here

enter image description here

enter image description here

With the help of moment distribution method.

enter image description here

[email protected]=45.78 – 58.86 × 3 + 19.62 × (32/2) = - 42.51 => 42.51 ( load is acting inversely)

[email protected] center of short span:

[email protected] = 45.78 - 39.24× 2 + 19.62 × (22/2) = 6.54 => -6.54 ( load is acting inversely)

D= D-clear cover - ɸ/2= 400 – 25 – 12/2 = 369 mm

X = d-(lhk)/2 = 369 – (400/2) = 169 mm.

Y = 0.85

Horizontal steel: long wall

ADD COMMENTlink
modified 7 months ago  • written 7 months ago by gravatar for tanya.tanyabarnwal tanya.tanyabarnwal0
Please log in to add an answer.