0
2.8kviews
Explain Diversity methods
1 Answer
0
144views

Diversity is a method used to develop information from several signals transmitted over independent fading paths. It exploits the random nature of radio propagation by finding independent signal paths for communication. It is a very simple concept where if one path undergoes a deep fade, another independent path may have a strong signal. As there is more than one path to select from, both the instantaneous and average SNRs at the receiver may be improved. Usually diversity decisions are made by receiver. Diversity can be of various forms, starting from space diversity to time diversity.

Different types of Diversity

Space Diversity

A method of transmission or reception, or both, in which the effects of fading are minimized by the simultaneous use of two or more physically separated antennas, ideally separated by one half or more wavelengths. Signals received from spatially separated antennas have uncorrelated envelopes.Space diversity reception methods can be classiffied into four categories: selection, feedback or scanning, maximal ratio combining and equal gain combining.

  1. Selection Diversity: The basic principle of this type of diversity is selecting the best signal among all the signals received from different branches at the receiving end. Selection Diversity is the simplest diversity technique.
  2. Feedback or Scanning Diversity: Scanning all the signals in a fixed sequence until the one with SNR more than a predetermined threshold is identified. Feedback or scanning diversity is very similar to selection diversity except that instead of always using the best of N signals, the N signals are scanned in a fixed sequence until one is found to be above a predetermined threshold. This signal is then received until it falls below threshold and the scanning process is again initiated. The resulting fading statistics are somewhat inferior, but the advantage is that it is very simple to implement(only one receiver is required)
  3. Maximal Ratio Combining: Signals from all of the m branches are weighted according to their individual signal voltage to noise power ratios and then summed. Individual signals must be co-phased before being summed, which generally requires an individual receiver and phasing circuit for each antenna element. Produces an output SNR equal to the sum of all individual SNR. Advantage of producing an output with an acceptable SNR even when none of the individual signals are themselves acceptable.
  4. Equal Gain Combining: In some cases it is not convenient to provide for the variable weighting capability required for true maximal ratio combining. In such cases, the branch weights are all set unity, but the signals from each branch are co-phased to provide equal gain combining diversity. It allows the receiver to exploit signals that are simultaneously received on each branch. Performance of this method is marginally inferior to maximalratio combining and superior to Selection diversity.

Polarization Diversity:

Polarization Diversity relies on the decorrelation of the two receive ports to achieve diversity gain. The two receiver ports must remain cross-polarized. Polarization Diversity at a base station does not require antenna spacing. Polarization diversity combines pairs of antennas with orthogonal polarizations (i.e. horizontal/vertical, +- slant 45o, Left-hand/Right-hand CP etc). Reflected signals can undergo polarization changes depending on the channel. Pairing two complementary polarizations, this scheme can immunize a system from polarization mismatches that would otherwise cause signal fade. Polarization diversity has prove valuable at radio and mobile communication base stations since it is less susceptible to the near random orientations of transmitting antennas.

Frequency Diversity

In Frequency Diversity, the same information signal is transmitted and received simultaneously on two or more independent fading carrier frequencies. Rationale behind this technique is that frequencies separated by more than the coherence bandwidth of the channel will be uncorrelated and will thus not experience the same fades. The probability of simultaneous fading will be the product of the individual fading probabilities. This method is employed in microwave LoS links which carry several channels in a frequency division multiplex mode (FDM). Main disadvantage is that it requires spare bandwidth also as many receivers as there are channels used for the frequency diversity.

Time Diversity

In time diversity, the signal representing the same information are sent over the same channel at di_erent times. Time diversity repeatedly transmits information at time spacings that exceeds the coherence time of the channel. Multiple repetition of the signal will be received with independent fading conditions, thereby providing for diversity. A modern implementation of time diversity involves the use of RAKE receiver for spread spectrum CDMA, where the multipath channel provides redundancy in the transmitted message. Disadvantage is that it requires spare bandwidth also as many receivers as there are channels used for the frequency diversity.

Please log in to add an answer.