4
33kviews
Describe construction and working of Wishbone suspension system. Also explain objects of suspension.
2 Answers
5
2.0kviews

Wishbone Suspension System:

enter image description here

  • The wishbone type is the most popular independent suspension system.
  • It consists of two (occasionally parallel) wishbone-shaped arms to locate the wheel. Each wishbone or arm has two mounting points to the chassis and one joint at the knuckle.
  • The shock absorber and coil spring mount to the wishbones to control vertical movement.
  • The vehicle weight is transmitted from the body and the cross member to the coil spring through which it goes to the lower wishbone member.
  • The wishbones not only position the wheels and transmit the vehicle load but also rest acceleration, braking and cornering forces.
  • The upper arms are shorter in length then the lower ones. This helps to keep the wheel track constant thereby avoiding the tyre scrub thus minimizing wear.

Objects of Suspensions:

  • To prevent the road shocks from being transmitted to the vehicle components.
  • To safeguard the occupants from road shocks.
  • To preserve the stability of the vehicle in pitching or rolling while in motion.
  • To provide required height to body structure as well as bear the torque and breaking reaction.
  • To keep the body perfectly in level while travelling over the uneven road.
5
767views

Wish bone type Suspension: Fig:1.1 shows a diagramatic sketch of wishbone type suspension with coil spring. The use of coil spring in the front suspension of cars is now almost universal.

enter image description here

It consists of upper & lower wishbone arms pivoted to the frame member. These arms resemble letter 'A' of the roman alphabet due to which these are also referred to as “ A arms”. The Spring is placed in between the lower wishbone & the underside of the cross member. The vehicle weight is transmitted from the body & the cross member to the coil spring through which it goes to the lower wishbone member. A shock absorber is placed inside the coil spring & is attached to the cross- member & to lower. wishbone members.

The wishbone arms are like the chicken wishbone or letter V in shape, beause of which the system is so called. Because of this V-shape, the wishbone not only position the wheels & transmit the vehicle load to spring, but these also resist acceleration, braking & cornering forces. The upper arms are shorter in length than the lower ones. This helps to keep the wheel track constant thereby avoiding the tyre scrub thus minimising tyre wear.

Objective of suspension: -
i) To acts as a safeguard for the occupants against road shocks
& provide comfort ride.
ii) to preserve the stability of vehicle in rolling, pitching, while in motion
iii) To minimize the effects of stresses due to road shock on
mechanism of a vehicle & provide cushioning effect.
iv) To provide the requirded height to body structure as well as
Bear the torque & braking reaction.
v) To keep the body perfectly in level while travelling over the uneven road.

Please log in to add an answer.