0
4.7kviews
Write a complete Apt Program (geometric and motion commands) to machine the outline of the geometry as shown in figure 2. The component is 5 mm tick. The milling tool used in 5 mm in diameter.

Consider spindle speed as 1000 rpm and feed as 0.3 mm/rev. Assume suitable data if necessary.

enter image description here

Mumbai university > mechanical engineering > sem 7 > cad/cam/cae

Marks: 5M

Year: May 2015

Difficulty: Medium

1 Answer
0
200views

APT PROGRAMMING :

enter image description here enter image description here enter image description here

Please log in to add an answer.